Ad Code

Ticker

6/recent/ticker-posts

FTTH Network Testing During Construction

FTTH Network Testing During Construction : When the construction of FTTH network is done, some testing is necessary, which I will discuss in this article. During network construction, some testing takes place at an OSP. When fiber is laid new splices have to be tested and tested using OTDR. Through bidirectional OTDR, we do a lot of accurate measurement, so bidirectional OTDR should be used for testing FTTH networks. Must remember that for accurate measurement of FTTH network must be use Bidirectional OTDR.

For acceptance testing, it is important to test each section of the FTTH construction. There are several testing methods, some of which are explained in this article. Each has specific advantages and disadvantages. Selecting the most appropriate method depends on the constraints encountered: labor cost, budget loss, test time service activation time, maximum allowable measurement uncertainty, etc.
FTTH network testing


Optical Loss Test of FTTH Network

The first optical loss test is set for FTTH network testing during construction and this test consists of two tests. Consisting of two test sets to measure insertion loss (IL) and optical return loss (ORL). 

Next, ORL sensitivity is determined by calibrating the minimum ORL that the units can measure. It may be possible that the limit comes from the poor part of the test setup, which is most likely to be the connector between the units and the reference test jumper. Actually you have to follow the manufacturer's instructions ORL sensitivity on both units and mentioning source and power meter. 

The measurement of FTTH networks can now be taken on an end-to-end network or any individual installed segment, such as the fiber between the FCB and the drop terminal. Purpose of this test is to identify any transposed fibers and to find out the value of IL and ORL to ensure that the loss has been budgeted.
Measuring distribution fiber IL and ORL

During the FTTH network measurement a table is prepared for the IL and ORL and the expected ORL values ​​are obtained. In this table Pr = Premises, CO = Central Office Mentioned.
Expected ORL value of FTTH Network

These values take into account only two connections. FTTH networks often include many connection points and, the reflection values are very sensitive to dust and scratches, these values can easily be affected by poor connections.

For example, a single connector might generate an ORL of 40dB, which would exceed the expected value for the entire network. For point-to-multipoint FTTH networks, the ORL contribution of each fiber is increased from 30 to 32 dB due to the bidirectional loss of the splitter.

Advantage of Method Optical Loss Test Sets

There is also some advantage of optical loss test sets in FTTH network, which is mentioned below-
➤Accurate IL and ORL measurement.
Bidirectional IL and ORL values.
Possibility to test every distribution fiber.
The identification of macrobands during the test is performed at 1550 and 1310 nm or another combination of wavelengths, including 1625 nm wavelength.
➤Transposed fiber identification on point to point networks.
➤Fast testing

Disadvantage of Method Optical Loss Test Sets

➤Required two technicians  (however with a point-to-multipoint network, a single OLTS close to the OLT can be used for all subscribers within the same network).
➤Required communication  between technicians (when switching fibers).
➤A point-to-point network is required, a technician has to move from the drop terminal to the drop terminal. 
➤In the event of a cut fiber or macroband, an OTDR is required to detect the fault.
➤Impossible to detect transposed fiber on point-to-multipoint network.

Use of an OTDR for FTTH Network Testing

Measurement with an OTDR


An OTDR used for this method. Unlike an OLTS, OTDR can identify and locate the position of each component in the network. OTDR will disclose the partition Loss, Connector Loss and Reflection, and Total End to Loss and ORL.

All fibers between the OLT and the first splitter (transport side) can be tested to characterize the loss of each splice and detect macrobands. Both directions test can be conducted.

The calculation of the actual loss (on average between each direction) of each splice will require post-processing of the results. FTTH engineer can measure the loss of the FTTH link like splitter and the loss of the cumulative link, as well as identify whether an unexpected physical event has occurred before or after the splitter. 

During FTTH network construction testing can reduce the number of problems that occur after customer activation by certifying end-to-end link integrity.
FTTH Link losses

Advantages of OTDR Test

➤Measures both IL and ORL values.
➤It is possible to test every distribution fiber.
➤Macrobands are identified at 1550 and 1310nm during testing or another combination of wavelengths involving 1625nm wavelengths.
➤In the case of  fiber cut or macroband, the defect may be located.
➤One technician can perform the job.
➤Fast testing.

FTTH Service activation

Maybe you all find FTTH service activation very easy, although this task should not be underestimated as this is the moment at which the customer experience begins. And the customer also has to maintain trust by giving a good service.

The FTTH network service activation scheme may be different depending on the topology of the fiber network. The trend is for multiple connection points for pre-engineered plug and play components, rather than an all spliced   approach, specifically for deployment in MDUs.

In the context of handling data related to testing and measurement in PON, service activation brings two new dimensions:

➤The results should be linked to customers or ONUs rather than fiber.
➤More than one test space may be required, usually two or three.
FTTH network PON power meter

FTTH Network Multiple testing locations

Testing engineers assist in verifying optical levels at different locations along the same fiber path to indicate problems and / or faulty components before activating customer service. 

Since FTTH network problems are often caused by dirty or damaged connectors, component inspection greatly reduces the need for troubleshooting, as the power level is verified for each network section.

It is also strongly recommended that each connection point be inspected using a fiber inspection probe before each power measurement.
Testing point in PON

FTTH Network Testing Points

➤The splitter, or more specifically by performing a power-level certification on the output, enables users to verify whether the splitter branch is functioning properly. This simple estimation makes it possible to confirm whether all network components (including feeder fibers) from the CO splitter output are in good condition. Typically, FDH includes SC / APC or LC / APC connectors, but may also include fusion spices.

➤Operating a power-level certificate at the drop terminal, engineers can mark the distribution fiber and drop terminal ports. Typically, a splice tray is included within the drop terminal that can cause macrobend problems.
testing of all wavelengths

➤The fiber connecting the drop terminals and the customer's premises is typically installed during service activation. To ensure reliable services to the customer, Network and Subscriber ONUs must meet their specifications. In FTTH network testing the best way to guarantee this is to perform a pass-through connection to fully characterize all operating wavelengths (upstream and downstream) in the PON. This can only be achieved in the service-activation phase, which uses dual-port PON power meters with power stroke connections; A normal power meter can only authenticate a downstream signal from the CO.

Last Word

In this article, I have tried to explain completely about the testing happening in FTTH network during construction. How did you all like this article "FTTH Network Testing During Construction", comment me in the inbox.

Post a Comment

29 Comments

  1. Nice post, getting FULL Information at one place its really good,, !!! Planet most love music app mp3 juice get here thanks ....

    Nice post, getting FULL Information at one place its really good,, !!! World most Famous app to make life easier without any problems thanks ....

    ReplyDelete
  2. At the point when these frameworks and machines cooperate, you experience solace, energy reserve funds, and solidness. echo park zip codes

    ReplyDelete
  3. Make an information base of the things your possibilities and customers ask most and foster a constantly refreshed oftentimes posed inquiries page. estudio arquitectura zaragoza

    ReplyDelete
  4. every minute of every day Sales Tool - notwithstanding the measure of data they expect, purchasers additionally request data to be accessible to them day in and day out, 365. Gone are the times of mentioning more data. driveway repair richmond va

    ReplyDelete
  5. Your logo, your attempt to sell something and your substance consolidate online to construct your image and scale with your business. Without a site, you may not exist in the psyche of your possibility. In any case, with BEST Construction Websites, you even the battleground and can even the arrange the cards intensely in support of yourself. reformas madrid

    ReplyDelete
  6. In any case, the BEST Construction Websites ought to do this and that's only the tip of the iceberg. Your site should assist you with developing your business, incorporate highlights that advantage you and your possibilities and go about as your generally proficient, productive and important sales rep.
    mélybölcsős fuvarozás Europa-Road Kft.

    ReplyDelete
  7. Teach - The more well known your show, the more traffic your site will get. Shockingly, an excessive number of independent company sites have inadequately composed deals duplicate, are centered around what they do, not how they can help the possibility, and don't connect with, engage and instruct the possibility in any capacity. When in doubt, schooling = change. Best construction sites accompany expertly composed deals duplicate zeroed in on client benefits and building up you as the master in your neighborhood market. Exclusive Pools

    ReplyDelete
  8. Possibilities can't get sufficient data about the organizations they are pondering working with. Give it to them or miss out to contenders who do!
    https://shuttlesky.in/

    ReplyDelete
  9. Inside these objective firms, distinguish the immediate construction employing authority (prompt construction chief of the construction position you look for) reformas zaragoza

    ReplyDelete
  10. Update Information Quickly - If you haven't seen, the world and the commercial center are moving quicker than at any other time. Pergolas Brisbane

    ReplyDelete
  11. A few significant elements influence the legitimate cases of those harmed in vehicle mishaps in street construction zones. Cautiously recording the conditions that prompted a mishap is a significant initial phase in getting ready for a claim. Local Deck Builders

    ReplyDelete
  12. There you can download for free, see the first of these data. Calgary Roofing Company

    ReplyDelete
  13. Optical loss is a big problem in our industry also. But none of the people at our cleaning company have it so we are good to go.

    ReplyDelete
  14. I would recommend my profile is important to me, I invite you to discuss this topic... Balcony membrane repair

    ReplyDelete
  15. When in doubt, schooling = change. Best construction sites accompany expertly composed deals duplicate zeroed in on client benefits and laying out you as the master in your neighborhood market.https://www.westseattlewindowcleaner.com/how-pressure-washing-seattle-can-benefit-your-home

    ReplyDelete
  16. wow, great, I was wondering how to cure acne naturally. and found your site by google, learned a lot, now i’m a bit clear. I’ve bookmark your site and also add rss. keep us updated. Waterproofing membrane

    ReplyDelete
  17. Another methodology is to figure out where the boss visits, for example, an industry exchange affiliation, or other office that would cultivate an opportunity meeting.PVC roofing, Seattle

    ReplyDelete
  18.  Offsite records storage ultimately provides business owners with the peace of mind of knowing that their most sensitive records are located in a highly secured facility. modular builder

    ReplyDelete
  19. On my website you'll see similar texts, write what you think. Satta king online

    ReplyDelete
  20. Update Information Quickly - If you haven't seen, the world and the commercial center are moving quicker than at any other time. construction companies knysna

    ReplyDelete
  21. A crane is operated by switches and cables for lifting and lowering resource materials for building structures of various kinds. https://thetoolsnation.com

    ReplyDelete
  22. The second most common time for a cost overrun is near the end of the project when you are selecting your finishes, i.e., cabinets, counter-tops, lighting and plumbing fixtures, flooring, appliances, etc. cost to build a house

    ReplyDelete
  23. Perhaps the greatest expense in remodeling your home comes from materials. By buying and shipping materials on your own you can save many dollars. renovation

    ReplyDelete
  24. Be that as it may, assuming you have a savvy content procedure, your show will be a hit.Cost Management

    ReplyDelete
  25. For instance, cost of cedar or IPE wood decking will commonly be higher than standard pine, however it's the most ideal choice to construct an enduring wood structure. vinyl decks vancouver

    ReplyDelete
  26. All of these different types of brick offer similar benefits, and ultimately it is the depth of your budget that allows you to opt for cut stone over a thin brick veneer. tuck point brick st. louis

    ReplyDelete
  27. Appropriating assets from your spending plan is critical. Kitchens and washrooms are gigantic selling focuses in a house, and that implies you ought to invest the majority of your energy and assets remodeling those rooms. https://www.bakersbuilds.nz/

    ReplyDelete
  28. This is such a great resource that you are providing and you give it away for free. I love seeing blog that understand the value of providing a quality resource for free.평택출장아로마
    화성출장아로마
    의정부출장아로마
    동해출장아로마
    삼척출장아로마

    ReplyDelete
  29. Hello, I am one of the most impressed people in your article. What you wrote was very helpful to me. Thank you. Actually, I run a site similar to you. If you have time, could you visit my site? Please leave your comments after reading what I wrote. If you do so, I will actively reflect your opinion. I think it will be a great help to run my site. Have a good day.온도테라피
    온도테라피
    온도테라피
    온도테라피
    온도테라피
    온도테라피
    온도테라피

    ReplyDelete